Types of porcelain floor to inspire your decor

Do you know the main types of porcelain tiles we have in the market? We’ve listed the most common ones you’ve probably seen out there and the differences between them.

The time to choose the ideal Porcelanato for the house is always difficult. This is because there are several different options with different finishes and objectives, besides the aesthetic part, of course. Some people choose to use the same type throughout the house to make them look uniform and easy to decorate, but this strategy is not ideal and may not be worth it at the end of the building.

Each type of porcelain tile has its function and you need to understand the need of each space before choosing yours. When setting a type for the whole house you will have poor performance in some rooms, since the strength of the material may not meet the needs of that environment.

The first step in correctly choosing the type of porcelain tile for your home is setting your goal in the room. For example: If you go outdoors, look for a material that has full water resistance, is non-slip to prevent slippage in wet conditions, Bangla Romantic SMS and is not vulnerable to blemishes among other defects caused by weathering. In-house you can focus efforts on choosing a floor that is to your liking, has resistance to furniture weight and stains that can be caused by natural wear and tear.

One of the types of porcelain tile we have is polished, which has a smooth surface. It is suitable for parts that have little or no contact with water because they are dangerous and slippery. To mitigate the problems in case you have flooring with this type of finish in the areas near the swimming pool or discoveries of the house, it is possible to use a mat. The next type of porcelain tile is enameling. In it, the piece is covered with a layer of enamel, on a surface that can be smooth or rough, shiny or matte.

One factor that should be considered when choosing this type is PEI, which indicates enamel resistance. The bigger, the tougher. The safest enameled porcelain tiles are the least bright, which have less chance of slipping.

The structured porcelain tile has a rough surface, is used most of the times, in swimming pool areas and bathrooms. They are chosen for this situation because they have a higher grip in wet environments, avoiding the chance of falls due to slippery floors.

All care is needed in choosing porcelain tile for these areas, since the risk can be great, especially for older people or children.

A very tough and slippery choice is the natural porcelain tile, with a 100% matte surface. It is usually used primarily in garages and residential yards or commercial sheds. It has this name since it does not require the polishing or enameling of the piece. The porcelain tile can also get a dull enamel finish, with a faint matte appearance, known as a satin finish. In this type of floor, it is possible to reach characteristics of natural stones, however, with much lower cost.

This material tends to be tough, easy to clean (without staining) and has low water absorption. good morning msg By not being polished, it also guarantees lower risks of falls due to surface skidding.

The lacquered porcelain tile is also capable of reproducing the appearance of natural stones, but with a slight luster on the higher “raised” surfaces. In this type of piece, small grooves are made to give relief in the ceramics. The polish gives a glitter in only a few points of the porcelain tile, to simulate natural wear as it happens on real stones. Finally, the external porcelain tile is made to resist frequent contact with water, as it has an abrasive and anti-slip surface. It is great for open outdoor areas or real estate with pool.


Leave a Reply